Quanzhou Yimao(Sany Group) Imp. & Exp. Co., Ltd. 
         Tel: +86-13799582961
          E-mail:sanyi@sanyi-hk.com
      Global Wholesale And Retail Procurement Platform
You are here: Home » News » LIFE HACKS » How to clean Nike air cushion sneakers

How to clean Nike air cushion sneakers

Views: 4     Author: Site Editor     Publish Time: 2018-10-24      Origin: Site

How to clean Nike air cushion sneakers

Special cleaning according to different parts during the cleaning process.


1. Nike's toe cap needs to be cleaned with a domestic washing machine.


2, of course, if your toe is too dirty, you can first clean the surface with a clean soft brush, then damp the head of the shoe evenly and soak for three to five minutes, then use a sponge to carry out Cleaning.


3. For the cortex part of the shoe body, you need to use a professional maintenance agent and cleaning agent to scrub with a soft towel.



Cleaning sneakers note:



1. Most of the raw materials for sports shoes are synthetic polymer materials (mostly polyester nylon mesh and non-woven artificial leather, the sole is made of rubber or rubber foam material), and some uppers are leather.


Therefore, avoid contact with organic reagents and grease solutions, and it is not suitable for long-term wear in high temperature environments. Generally, the wearing or washing temperature should not exceed 45 degrees Celsius.


2, if stored for a long time, the shoes should be cleaned first, dry and placed in a cool and ventilated place to store, so that the shoes have sufficient time to dry, so as to avoid mildew. Leather shoes are best to hold the paper in the shoe or shoe support to avoid serious deformation.


Put the toe down on the sole to the wall and dry it at a ventilated place at room temperature to prevent water from immersing in the midsole foam. (Because the foam material is not easy to dry, it is recommended not to lay the wet shoes flat.)


3, in order to use the sneakers look more beautiful, please do not use a hard brush or excessive force during the process of wearing or brushing, but also can not use nails or sharps to lick the corners of these printed patterns.


After wearing for a period of time, some patterns may have some small cracks on the surface (especially the often tortuous parts), which is normal.


Soak shoes: The shoes are thrown into the basin. The basin is filled with 2/3 of water. The washing temperature should not be higher than 45 degrees Celsius, so that the shoes are soaked by water. For the general mesh shoes, some washing powder can be added. Note: Do not let the shoes soak in the water, can not be thrown in the basin and the same as the dirty clothes, it will not be washed after half a day, so that your shoes are easy to open after drying.

Washing the sole: This is very easy. Use a shoe brush to brush on the soap and then brush the sole. What small stones can be picked up with a toothpick in the rubber seam of the sole.

Washing the upper and the shoes: use the old toothbrush, but don't use the old ones. In fact, you can also buy a new toothbrush with a softer toothbrush for more than 3 yuan, and use a shoe brush. Yes, but I think it would be good if it is a professional track and field shoe, but if it is a normal running shoe, it will hurt the mesh. Brush a little soap with a toothbrush, then brush the mesh surface, the same can be brushed inside, right, you must remove the shoelace before washing the shoes, the laces can be grasped with soap, you can also brush with a toothbrush Tongue.

Wash the shoes repeatedly 1, 2 times, drain the dirty water, change the water, soak the shoes in the water, and brush the shoes with a toothbrush without brushing the soap. For the leather part, only brush with water, can not add any detergent, otherwise the skin will yellow, crack, and avoid contact with organic reagents and grease solutions.

Surabaya: You don't want to put it in the washing machine. You can squeeze the water out of the water in the front and back of the shoe with a lot of sponge. Then grab the middle sole, the heel is in the front, the toe is facing behind, start to pick up your arm and draw a few times before and after. The more times you lick, the better the shoes.

Drying: You can wear a few holes with your shoelaces, then tie it to the triangle clothes rack, hang a shoe and dry it as if it is ventilated but not exposed to the sun. Leather shoes are best to hold the paper in the shoe or shoe support to avoid serious deformation.

END

Precautions

When drying, do not be exposed to the sun. Do not use heat or open flames, otherwise your shoes will turn yellow and hard.

After the leather part is dry, it can be covered with shoe polish. I have always been directly immersed in water.... I have not seen any problems...


If the AF1 is all leather, get the shoe store that is now full of street chains, let them clean it up...


If the coffee does not enter the shoes. You can wipe it with your own water.... The shoes are all distressed at the beginning. I have a few pairs of limited editions... I don’t feel bad now if I wear them. Hahaha if The mesh or synthetic material of your shoes

1

Soak shoes: The shoes are thrown into the basin. The basin is filled with 2/3 of water. The washing temperature should not be higher than 45 degrees Celsius, so that the shoes are soaked by water. For the general mesh shoes, some washing powder can be added. Note: Do not let the shoes soak in the water, can not be thrown in the basin and the same as the dirty clothes, it will not be washed after half a day, so that your shoes are easy to open after drying.

2

Washing the sole: This is very easy. Use a shoe brush to brush on the soap and then brush the sole. What small stones can be picked up with a toothpick in the rubber seam of the sole.

3

Washing the upper and the shoes: use the old toothbrush, but don't use the old ones. In fact, you can also buy a new toothbrush with a softer toothbrush for more than 3 yuan, and use a shoe brush. Yes, but I think it would be good if it is a professional track and field shoe, but if it is a normal running shoe, it will hurt the mesh. Brush a little soap with a toothbrush, then brush the mesh surface, the same can be brushed inside, right, you must remove the shoelace before washing the shoes, the laces can be grasped with soap, you can also brush with a toothbrush Tongue.

4

Wash the shoes repeatedly 1, 2 times, drain the dirty water, change the water, soak the shoes in the water, and brush the shoes with a toothbrush without brushing the soap. For the leather part, only brush with water, can not add any detergent, otherwise the skin will yellow, crack, and avoid contact with organic reagents and grease solutions.

5

Surabaya: You don't want to put it in the washing machine. You can squeeze the water out of the water in the front and back of the shoe with a lot of sponge. Then grab the middle sole, the heel is in the front, the toe is facing behind, start to pick up your arm and draw a few times before and after. The more times you lick, the better the shoes.

6

Drying: You can wear a few holes with your shoelaces, then tie it to the triangle clothes rack, hang a shoe and dry it as if it is ventilated but not exposed to the sun. Leather shoes are best to hold the paper in the shoe or shoe support to avoid serious deformation.


Of course, if your shoes are leather


1

Clean up the dust, there must be a lot of dust on the surface of the shoes that pass through, and use a soft brush or a soft rag to remove the dust from the shoes.


2

Wipe the wipes, soak the towels and wipe all parts of the shoes, but be careful not to get too wet.


3

Ventilate and dry, put the scrubbed shoes in a ventilated place to dry, but not in the sun, which will damage the cortex.


4

Oil on the shoes, go to the supermarket or outlet to buy the shoe polish that suits your style of shoes, apply it to the shoes, the amount should not be too much.


Reference: http://www.emaor.com/news.html

It is best not to clean, because the more you wash the coffee stains, the more you run inside... the glue that affects the inner surface is not good.


Try to wipe it with a damp cloth.